Resumen

This article provides a comprehensive guide to CAS 13154-24-0, also known as Triisopropylsilyl Chloride. It delves into the chemical properties, uses, safety considerations, handling procedures, and regulatory information surrounding this compound. The guide aims to equip readers with a thorough understanding of Triisopropylsilyl Chloride, its applications in various industries, and the necessary precautions to ensure safe handling and usage.

Introduction to CAS 13154-24-0: Triisopropylsilyl Chloride

CAS 13154-24-0, commonly referred to as Triisopropylsilyl Chloride, is a versatile organic compound with the chemical formula (CH3)3SiCl. It is widely used in the synthesis of organosilicon compounds due to its ability to introduce a silyl group into organic molecules. This guide will explore the various aspects of Triisopropylsilyl Chloride, including its chemical properties, applications, and safety guidelines.

Chemical Properties of Triisopropylsilyl Chloride

Triisopropylsilyl Chloride is a colorless liquid with a characteristic odor. It has a boiling point of approximately 102°C and a melting point of -45°C. The compound is highly reactive and can undergo substitution reactions with nucleophiles. Its molecular weight is 166.68 g/mol, and it is soluble in organic solvents such as ether, chloroform, and acetone. These properties make it a valuable reagent in organic synthesis.

Applications of Triisopropylsilyl Chloride

Triisopropylsilyl Chloride finds extensive use in the synthesis of organosilicon compounds, which are widely employed in various industries. Some of the key applications include:

1. **Silicone Polímero Production**: Triisopropylsilyl Chloride is used in the production of silicone polymers, which are used in sealants, adhesives, and lubricants.
2. **Silane Coupling Agents**: It serves as a precursor for silane coupling agents, which are used to improve the adhesion between inorganic and organic materials.
3. **Electronic Materials**: Triisopropylsilyl Chloride is utilized in the synthesis of electronic materials, such as semiconductor devices and photovoltaic cells.

Safety Considerations for Triisopropylsilyl Chloride

Handling Triisopropylsilyl Chloride requires strict adherence to safety protocols due to its potential hazards. Here are some key safety considerations:

1. **Health Hazards**: The compound can cause irritation to the eyes, skin, and respiratory system. Prolonged exposure may lead to more severe health effects.
2. **Handling and Storage**: Triisopropylsilyl Chloride should be handled with care, using appropriate personal protective equipment (PPE) such as gloves, goggles, and lab coats.
3. **Disposal**: Proper disposal methods must be followed to prevent environmental contamination.

Handling Procedures for Triisopropylsilyl Chloride

To ensure safe handling of Triisopropylsilyl Chloride, the following procedures should be followed:

1. **Ventilation**: Adequate ventilation is essential to prevent the accumulation of vapors in the workplace.
2. **PPE**: Workers should wear appropriate PPE, including gloves, goggles, and lab coats, to minimize exposure to the compound.
3. **Spill Response**: In case of a spill, the area should be immediately evacuated, and appropriate spill containment and cleanup procedures should be followed.

Regulatory Information for Triisopropylsilyl Chloride

Triisopropylsilyl Chloride is subject to various regulations and guidelines, including:

1. **OSHA Regulations**: The Occupational Safety and Health Administration (OSHA) has established permissible exposure limits (PELs) for Triisopropylsilyl Chloride to protect workers from occupational exposure.
2. **DOT Regulations**: The Department of Transportation (DOT) regulates the transportation of hazardous materials, including Triisopropylsilyl Chloride.
3. **Environmental Regulations**: The Environmental Protection Agency (EPA) has regulations in place to prevent environmental contamination from the compound.

Conclusión

In conclusion, CAS 13154-24-0, or Triisopropylsilyl Chloride, is a versatile organic compound with significant applications in various industries. Understanding its chemical properties, applications, safety considerations, handling procedures, and regulatory information is crucial for anyone involved in its synthesis, storage, or use. This guide provides a comprehensive overview of Triisopropylsilyl Chloride, aiming to ensure safe and responsible handling of this compound.

Keywords: CAS 13154-24-0, Triisopropylsilyl Chloride, chemical properties, applications, safety considerations, handling procedures, regulatory information